Skip to content
Home » How Not To Pick A Barn Door

How Not To Pick A Barn Door

  • by

Here’s an overview of the 6 most common mistakes to avoid when looking for the perfect barn door:
Measurement Not Correctly
Doing not take into account privacy
Moving Without a Barn Door Floor Guide
Do not protect wood finishes
Making the wrong choice of hardware for the Door’s Weight
Selecting a metal of low-quality for Hardware
Inadvertently forgetting the need for a soft Stop and Hush Wheels in peaceful Spaces
Don’t Use a Track Support Header Board
Deteriorating Your Drywall
The Wrong Cleaner

MISTAKE 1: Measuring incorrectly

Measurements for barn doors differs from that of the swinging door. You’ll need the right size for sliding doors than one that swings in the same opening.

How can you gauge the barn door?

Begin by measuring the distance from on the ground to where the doors frame is. The majority of standard interior doors will be around 80″ tall. If you have a casing surrounding the frame, measure the casing’s edge on the outside and not at the top of the opening. Whatever your final measurement then add 1 inch to achieve your desired door’s height.

To determine the width the barn door should be take a measurement from one end from the entrance to opposite side. Also, take measurements up to the edges that are outside on the doors casing. The majority of interior doors measure wide by 36″ wide. Add two inches to the width measurement and you’ve got your ideal barn door’s in both width and height. Why should you add an additional inch on your doors? This leads us to the next question.

2. Not taking into account Privacy

A lot of people love the idea of installing a sliding barn door to their bathroom or a smaller space. However, they might not be asking the crucial question: is the barn door sufficiently private for bathrooms? Yes but it will depend on the way it’s installed and the material employed. Solid wood is more effective in soundproofing than a hollow core door. The thicker the door the more effective. One of the most crucial factors that help make the barn more secure is having the door overhang the opening. We suggest adding at the very least one” overlap on both sides and 2″ is better. The more overlap you can get less sound and light will pass through. You could also apply high-quality weather stripping on the door casing, if it has an offset to make the sliding door more secure against the opening when shut. A sweep of the bottom will also aid in soundproofing a barn sliding door.

There are also lids for barn door locks, such as the teardrop lock, or a hook-and-eye latch that can help to keep a barn doors Melbourne private.

MISTAKE 3: Using Without a Barn Door Floor Guide

It could appear to be a minor thing yet it’s an essential element of the Barn door’s installation. sliding guide for the door. These little accessories are generally mounted on the floor and prevent doors from hitting the wall and stop the unpleasant sliding back and forth across the track each when you open it. The most commonly used and most cost-effective kind of guide is a T-guide. It is an option in all of our hardware kits for flat tracks however, if you don’t have one, or you require an upgrade, we’ve got an array of sliding floor guides for barn doors. A T-guide is constructed of an extremely durable polymer and is positioned on the floor. It can be fitted into a groove that is cut into the lower part of the door. This keeps the door in line with the track.

If there isn’t a groove in your door, you may utilize a guide that fits snugly against the door’s bottom, such as this C-guide. There are standard sizes as well as an option for adjusting to accommodate unusual thicknesses so that you can achieve a perfect size.

If you’re not planning to drill holes in your flooring, you can opt for an indoor sliding door guide that is mounted to the wall. It is able to slide under over and in around, and is fixed on the wall. When the door moves, the wheel moves it to ensure it is properly positioned. Each of these guides does exactly the same thing. It is your choice to decide which one will best suit your needs. Don’t forget to choose one!

4. Not protecting Wood Finishes

One of the main problems we find in barn doors is the tendency to warp, twist and cupping as a result of the door wasn’t finished with a seal. Doors that slide are more susceptible to warping as they only have one point of contact at which hangers connect to the doorway, in contrast to swinging doors with hinges to support the door from the top to the bottom.

A good finish not only helps protect the door from the effects of temperatures and variations in the surrounding environment It also helps to reveal the true hue of the wood and increase the grain patterns you might not be able to see otherwise. The tiles are available in our guide to wood species which we finished on one side and left the other in its natural state. It’s quite a remarkable distinction! In addition, the finishes can also offer ultraviolet protection to doors which could have direct exposure to sun.

FAILURE 5: The wrong hardware is selected for the Door Weight

Different types of hardware be able to withstand different load capacities. If your door is constructed of dense wood, heavy material or metal or glass panels, there are certain styles that you should avoid. If you’re looking for barn door hardware to support a large door, you’ll need an option that wraps around the door and ties onto the front in a classic fashion, such as this one which is designed to support up 400 pounds. Beware of any design that is only a top-mount, such as Aero or the contemporary architectural style, as these types of hardware do not be strong enough to withstand more than 150 pounds securely. If you have a massive or large door, consider the barn door hardware that is industrial choice that can handle up to 800 pounds.

MISTAKE 6: Selecting the metal with low-quality

There are many options for various metals that you can pick for the hardware for your barn door. So what is the ideal hardware for your barn doors? The majority of the hardware products available currently are made from aluminum. This means that hardware costs less, however it’s at the bottom in terms of quality. If you want equipment that will last for an extended time, stay clear of aluminum hardware.

Steel is a stronger alternative, but there are several kinds of finishes that are made with steel. Hardware made of raw steel is a fantastic option for those who want their hardware to be durable but also have a worn-in appearance. With time, the raw steel begins to oxidize and begin showing rust spots. This looks stunning in a shabby or industrial chic setting. Be aware of the way the hardware will alter its appearance when you choose this type of design. If you require something that is truly industrial, but will not get worn down as fast as steel in raw form. If that’s the scenario, hot-dipped galvanized steel sliding hardware is a great option that can be used in outdoor environments and stands against the corrosive environment better than other metals.

If you’re searching for an exact Barn door’s hardware shade, be sure that it’s powder coated. Colors that are powder-coated are considerably more durable than painted steel. Steel that is just spray-painted (often spray-painted) is not able to stand long enough to stand the test of time as powder-coats baked on the metal , and create an extremely thick and dense coat of colors.

Steel is another great choice for hardware kits for barn doors. It is not just a great material an elegant and contemporary hardware for your barn door however, it’s also exceptionally durable and its surface stays clean and flawless without requiring much attention.

If you’re looking for something modern and trendy You can also choose an exclusive metal such as barn door hardware made of olid brass or silver, gold or copper powder-coated metallic steel.